1999 Suzuki Vitara "replace belt" Questions

...are vibrating, tighten the belt of change that belt. if the belt has cracks on it, it needs to be replaced, if not, then put some grease on the inner and upper side of the belt (oil would also work ...

...diffrent sizes. you should also make shure that the timing belt tensioner isnot worn or in need of replacement. this will help prolong the life of the new belt good luck with this ...

...replace the old belt. Looked at the Alternator for a tension bolt or tension bar, but can't find one. Is there anyone out there that can help me with this? Thanks, Jay hey there,that car might have a ...

...belt(new belt - didn't fix noise) one pulley squealing, need diagram to i.d. it's name to get replacement part If it is on the end of the tension arm, it is an idler pulley. All others turn ...

...belt in my suzuki escudo after how many kilometers YOU CAN LOOK IN THE BACK OF YOUR OWNERS MANUAL IT SHOULD TELL YOU THERE . YOU CAN ASK YOUR LOCAL MECHANIC OR YOU CAN REPLACE IT BETWEEN 60 TO ...

comes first. They have often been known to last a lot longer than that but it is cheaper to have it replaced at the specified intervals than to risk critical and expensive engine damage if it breaks

...belt to replace the alternator. Suggested to loosen the tensioner but not sure how to do that. Tensioner is spring loaded device with hole in its face usually the size of a 1/2" square drive breaker ...

do you have to remove the crankshaft pulley to replace the timing belt on a 1993 vitara 1600cc yes.

Hi I need to replace a timing belt on a suzuki sierra 1982 F10A engine. What are the timing reference marks for this? Your timing marks should be located on your flywheel.

A procedure for removing a timing chain on a 1999 1.6 4 cylinder Suzuki Vitara ? 1.6 My suzuki has a timing belt.. obtain a Chilton Manual for your car.. As you take it apart take pictures at every ...