1999 Suzuki Vitara "remove left side axle 2000" Questions

prybar, To remove the left side, Remove mounting bolt from inner joint flange, Pull out axle from hub. To reinstall just reverse the prosses. I hope this help on your job... Thank you for use fixya...

...remove hub assembly. Pull the axle shaft out through the opening left by the hub bearing. Cut off the old boot and clamps. Hold axle shaft and tap joint and axle stub off of shaft with a hammer. ...

...left side front axle replaced and left lower ball joints. Any ideas as to why it is STILL stressing me out? Have the wheel hub bearings checked.   Ifound the same condition in the rear end of my ...

...left side half shaft on a 2000 buick park avenue remove tire brake caliper tie caliper up to coilspring remove axle nut seperate tie rod end and ball joint then slide the axle out of tranny tap the ...

...remove the front left axle shaft on a chevy 2007 remove the axle nut first, always took the upper ball joint loose just take the nut off apply some upwards pressure and hit spindle with hammer and it ...

...Should I change fluid and filter? Just had it done 6 months ago. it's not in the bottom pan it is in the side cover you will need to drop the side of the sunframe and remove the left axle ...

...left. check side carrier bearings in the diff i have rreplace a lot of them for the same noise thats all you have to do remove the diff cover remove end caps and see if the bearings are pitted if so ...

...left front wheel bearing. Also I have changed the rear ones. Should I go ahead and change the other side? Yes you can try replace it What you need to do is go to an auto parts store such as AutoZone. ...

remove the rear axle bearing on a 2000 Chevy 1500 pickup? 2000 Chevy 4x4 pickup You will have to go to autozone to rent a special puller ,,,or make something yourself,, that hooks behind the bearing,,

...left side axle oil seal how to pull axle remove the rotor/drum brake pads and emergency brake shoes,then there are four bolts that hold in the axle .but its a very hard job to do at home there is ...