2000 Subaru Legacy "spark 2" Questions

...2.5's had different crank angle sensor tabs on the timing gears. Usually, if that's the problem, you will have spark on 2 cylinders and none on the other 2 and none will be fireing at the right

cykinder 2 and 3 missing subaru how many miles on it and has the spark plugs been changed. changed the spark plugs

SPARK PLUG COMES FROM THE FACTORY WITH. Only turn the plug 1/16 after seated finger tight if it is a tapered seal. Turn it 1/4 - 1/2 turn past finger tight if it has a compression ring seal. It's best

...spark and compression first. if they don't happen at same time, the timing skipped or belt broke. if all is good pull plugs and inspect, could be flooded (WET) from fuel. either replace or spray with ...

...spark and their all ok. its a SUBARU LEGACY 2.O TWIN TURBO B4 Valve Timing sounds off to me (belt driven to valves) You are assuming the timing marks on the heads AND your engine drive pulley are OK, ...

...spark (i changed the coil with no improvment)any suggestion appreciated its quite possibly the crank angle sensor as they do this when they heat up,the car wont start,till it cools down,you can get ...

spark plug firing order please? What is the firing order of a 1994 subaru legacy 4 cylinder Question edited for clarity. Question moved to model Category Firing order is 1-3-4-2. May 18, 2012 Cyl. 2+4

...2 and 3 are mising you will need to find out why, is it bad spark plug wires or a vacuum leak or injector problems, start by checking the spark plugs and wire first, replace them or swap with another ...

...2 cylinders both front cylinders in front lack spark. problem was intermitent at first but now all the time. I changed the plugs and checked for spark and there was nothing. changed coil pack no ...

...spark plugs, and fuses. i have just under 1/2 tank gas, charged the battery, tried using starter fluid. now what? USE A SPARK TESTER TO SEE IF YOU HAVE SPARK AT PLUGS.A HAVE CAR SCANNED TO CHECK CMP ...