2000 Subaru Legacy "rear light" Questions

...rear light assembly is a louvered plastic grate. Remove the grate by pushing the two plastic latch tabs toward the center of the grate and swing the grate out etc. Now remove the bulb bracket for the ...

...light goes off, power to rear wheels is restored, yet the rear wheels seem to fight the front wheels when you are turned the vehicle at low speeds. This happens particularily when in turning in ...

...the hood. If you have two lines, then that tank supplies the rear as well. If you only have one line coming off of the tank, then it is as the previous poster said. Above the left rear tail

...light is out the all wheel is working can you tell me how it works You have it backwards. The fuse is not suppose to be in it unless you don't want the rear to work. Remove the fuse and it should be ...

...light in the rear window, if it lights up (assuming the bulbs are good, no one ever changes them), then the problem is most likely in the turn signal switch, hope this helps! Thiers lots of brake ...

light came on on the dash to indicate it was on front wheel drive only. I have it up on jack stands and the rear wheels will turn slightly but no real power to them. You have it backwards. The fuse is

Why is my AWD light blinking? AWD light is blinking The light is more then likely being triggered by the computer seeing two different readings from the two vehicle speed sensors(front and rear)

...why the warning light stays on? (this is not the parking brake inicator) Your brake light is out. Check brake lights and repl. burnt light bulb . Did you check the bulbs at the rear? One is burnt

...rear oxygen sensor that should solve your problem, then have engine light shut off or drive a few days and computer will shut off after it completes its testing and everything passes. hope this is ...

Rear brake light aren't working subaru legacy 2004 Rear brake light aren't working subaru legacy 2004 Check the bulbs, if they are OK you may have a faulty brake light switch.