1999 Jeep Cherokee "map sensor" Questions

...MAP sensor. To see if this is the problem, assuming that the Jeep won't start but is turning over, unplug the MAP sensor and then plug it back in. If you can start it now, the MAP sensor needs to be ...

po108 repair repair trouble code po108 Faulty map sensor or vacuum hose leak going to map sensor or a short in the wiring to map sensor.

...map sensor If you connect it while engine is running, engine will die, start engine and check that you have vacuum going to MAP sensort, if you do, could be a bad MAP sensor, if no vacuum add in-take ...

...MAP sensor. Procedure is listed below. If the Jeep cuts out when accelerating, this is the usual problem. 2.5 liter engine MAP sensor:4.0 liter engine MAP sensor:TESTING See Figures 3 and 4 Fig. Fig. ...

done check engine code dx i got a code for map sensor. what are systoms for a bad map sensor Rough idle , poor performance , runs rich, etc...

map sensor on it, I just don't know what else to do... vacuum leak? a different sensor? transmission? I NEED HELP FAST!!!! check for vacuum leaks,the throttle position sensor and the map sensor to see

map sensor 99 jeep cherokee. 4.0 inline 6. There are 3 wires out of the map sensor. an orange one, green one and a black one with a yellow stripe on it. Which one is power, ground and ECU? well if you

...MAP sensor not hooked up. I have tried two differnet MAP sensors thinking I was on to something. The EGR is also new ans working. Return fuel pressure is good. I tried new computer under glove box, ...

map sensor in a jeep 2006 grand cherk Most map sensors are mounted on the firewall above and behind the engine. All have a vacuum line attached to the manifold and an electrical connection as well. If

...MAP sensor. If you remove the MAP sensor, the black flat thing mounted to the upper center of the firewall, you can access the temp sending unit with a deep well socket. Make sure the engine is cold, ...