...Chevy S10. It just suddenly stopped running. Here's what I checked: ignition module (good), ignition coils (good), fuel pump (good), fuel filter (new/good), fuel pressure to fuel rail 39 psi (good), ...
...Chevy S10 firing order The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order ...
...chevy s10 v6 in a chevy s10 v6 zr2 4x4 need to do timing and find TDC on cylinder 1, at the moment i have on spark timing is quite off I take it the dist was removed, if not then your problem is ...
...chevy s10 2.8 need diagram For the 1991 Chevrolet S10 or T10 Pickup 2.8L V6: Firing Order: 1-2-3-4-5-6 Cylinders: .......(back)........ |..5..|........|..6..| |..3..|........|..4..| ...
Question about Isuzu Hombre
...Chevy S10 pickup for the transmission. It's a new transmission but it will not shift gears believe problems are with the wiring? Chevrolet S10 Pickup 2003 - SYSTEM WIRING DIAGRAMS ...
...Chevy S10 LS. Heated o2 sensor, where does it go? I have a 2000 Chevy S10 LS 3-Door 4.3L 4x4. I have 3 o2 sensor, where is the best place to put it up or down stream. Question edited for clarity. ...
...chevy s10 pickup 4.3L 1999 Chevrolet S10/T10 P/U 4.3 liter V-6 VIN "W" Hope this helps (remember to rate and comment this). Firing order is 1,6,5,4,3,2.Number one is on the drivers side front.Hope ...
......
NEED DIAGRAM OF BOLTS FOR CHEVY S10 BED SO I CAN C WHERE THE BOLTS R LOCATED SO I CAN TAKE THEM OUT 1 1 1 1 1 1 there is 6 to 8 look under the bed 2 to 4 in front 2 to 4 in back usely 15 mm or 18 mm
...chevy 89 s10 4.3 Here is the image if you need it: Facing your engine: 6 5 4 3 2 1 Clockwise rotation of distributor, 1-6-5-4-3-2 18436572 Firing order 1-6-5-4-3-2 Distributor rotates ...
170 questions posted
Usually answered in minutes!
106 Questions
74 Questions
20 Questions
24 Questions
2 Questions
