1995 Isuzu Rodeo "timing marks" Questions

Question about Isuzu Rodeo

2002 Isuzu Rodeo 6VD1 DOHC. Timing marks don't line up!

...Timing marks don't line up! Can't get the passenger side cam marks to come into line when all the other marks line up including the timing belt marks they line up. It's just the passenger side cam ...

Question about Isuzu Rodeo

1 Answer

I need to know where the timing marks are on a 96

...timing marks are on a 96 4wd isuzu rodeo. CAN ANYBODY HELP ME PLEASE? I hope you get this, I was going to go to bed until I noticed how bad you were needing some timing marks :) Injection pump and ...

Question about Isuzu Rodeo

1 Answer

On a 1999 Isuzu Rodeo 3.2 V6 DOHC If you put all timing marks together on engine and then put timing belt mark all together on the engine and rotate two rounds with crankshaft does all the marks come

...timing marks together on engine and then put timing belt mark all together on the engine and rotate two rounds with crankshaft does all the marks come back together on the engine and timing belt or ...

Question about Isuzu Rodeo

2 Answers

Replace timing belt holden vectra 2.2ltre

...marks timing cover has marks on it,line it up with pulley,remove pulley and cover,check to see if any marks on camshaft.un do tensioner.to be sure make your own marks how we do space teath of timing ...

Question about Isuzu Rodeo

2 Answers

Won't start after timing belt has been replaced

...cover back plate at those two spots, those will be the timing marks. You will notice the cams dont spring into those positions on every turn, that means they are not on the right stroke to set

Question about Isuzu Rodeo

1 Answer

1995 2.3L 4W ISUZU RODEO HOW DO YOU GET IT BACK IN TIME

...Re-check the timing marks on the crankshaft and camshaft. Re-install the timing belt cover and everything else you took off to get to the belt. Be sure to torque the crankshaft pulley bolt to

Question about Isuzu Rodeo

2 Answers

Timing belt alignment

...timing marks on the camshaft sprockets and crankshaft are aligned with their corresponding stationary marks. The 0 degree mark on the lower timing belt cover is the timing mark for the crankshaft ...

Question about Isuzu Rodeo

1 Answer

Timing belt

...timing marks align with the timing marks on the oil pump and front plate. When the timing marks are align, no pistons are at TDC for the compression stroke. Valve damage may result if the sprockets ...

Question about Isuzu Rodeo

1 Answer

Water pump and timing belt replacement

water pump and timing belt replacement confirm you timing belt marking at the engine before you start the work. then dismantle all the belt one by one until you reach the timing cover. mark the timing

Question about Isuzu Rodeo

1 Answer

I need the timing to motor 3.2 .

...timing marks with the pointer dots on the back covers. Verify that the pointer on the crankshaft aligns with the mark on the lower timing cover. NOTE When the timing marks are aligned, the No. 2 ...