Question about Isuzu Trooper
...Timing Belt ENGINE MECHANICAL 6A?31 2. Align the alignment mark on the RH bank camshaft drive gear pulley (2) to the alignment mark of the cylinder head cover RH (3). 3. Align the alignment mark ...
...timing belt of my isuzu tropper 3.2 sohc if this is 6VD1 engine it has single cam gear each head, but is still a 2 cams per head, engine if belt has broke or you have turned any gear you must remove ...
timing belt off and both cams moved. you will have to turn the engine to dead on cylinder one. and then realign the cams. i dont have access to that particular model but usually there are marks on the
timing marks pulled camshafts to do valve job and need to align marks on drive gear and cams It's more to it than aligning the marks since the cam pulleys turn about three times or more to one turn of
...engine code 4JGE or 4JX1), it has no timing belt. Cam and ignition timing is by way of gears. No belt to replace. Posted by Hjalmare on Dec 09, 2009 the 1millionth post , with no country stated, no ...
...timing or valvetrain problem, battery good. headwork has been done in previous shop. cam timming is possibly out due to gear reduction set up in heads suggest remove rocker covers and make sure cam ...
Question about Isuzu Trooper
...engine the opposite way. After that is done, find out where the rotor position is for #1 on the distributor. (you can do this by looking at the cap and matching it up with the #1 plug wire. Mark the ...
engine is correctly timed, the timing marks will NOT perfectly align. Figure 2. Figure 3. RH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 4. RH Bank Intake
Question about Cars & Trucks
...timing of a Deutz F6L913 engine. The crankshaft gear has a timing mark and the center gear also has two timing marks, but the camshaft has no mark. The center gear timing can not match the crankshaft ...
Question about Isuzu Trooper
...engine Thanks Kevin Looking for cambelt timing marks/ positions please, for new belt (old one shredded) Twin cam engine thanks Kevin these bend valves if belt breaks while running Align the timing ...
279 questions posted
Usually answered in minutes!
480 Questions
463 Questions
423 Questions
323 Questions
317 Questions