2000 Chrysler Sebring "replace oil pressure switch 99" Questions

Ad

Question about Chrysler Sebring

1 Answer

...replace the oil pump and the oil pressure switch on a '99 Sebring Convertable but I no longer have the owners manual. I'm looking to find out how to do it and if there's going to be any special tools ...

Ad

...oil pressure switch. If so, how difficult and costly is that to be replaces on a 2000 Chrysler. For all car problems kindly visit one of the link http://www.autozone.com here you have to register and ...

Ad

Question about Chrysler Sebring

1 Answer

...oil sump. To replace the switch, under the hood look for the power steering pump on the driver side of the vehicle, to the right and under the p/s pump is the oil pressure switch, If it is wet, its ...

...10psi. The problem could be a faulty pressure switch, or the engine could really have low oil pressure. You can replace the switch, or check the pressure with a mechanical gauge and see what

Question about Chrysler Sebring

1 Answer

...out of oil solenoid wire harness Are you calling the oil pressure switch the oil solenoid ? The oil pressure switch could have failed which would push oil out the terminal where the wire is

...oil pressure is runnig at around 35 to 45 psi constantly. Just replaced the oil pump and sender switch. Is this the correct pressure for this engine. thats good oil pressure for that year and the ...

oil pressure.  After that, the oil pressure switch keeps the pump on, most of the time by supplying a ground to the fuel pump relay.  This is a built in safety thing, when the engine isn'

Question about Chrysler Sebring

1 Answer

replace the oil pressure switch on my 99 ford exploreer. can you tell me where it is? The sending unit is going to be down by the oil filter. It should have some wires running to it. If you don't have

Question about Chrysler Sebring

1 Answer

...oil pressure I have a 99 GMC Sierra with the 4.3. It has 196000 miles and runs great. I recently had to replace the distrubutor. After I buttoned everything up I fired her up checked everything went ...

Question about Chrysler Sebring

1 Answer

replace the Oil Sending Unit. Located towards the bottom of the engine. When these go bad the pressure will not stabilize and can damage your engine. There is also a service bulletin to look at before

Not finding what you are looking for?
2000 Chrysler Sebring Logo

588 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...