2003 Jeep Grand Cherokee "replace crank sensor gt" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...crank sensor, cam sensor, map sensor, tps, coil, plugs, wires, cap, rotar, ign switch, coolant temp sensor and i have 2 pcm's that work and both flash error codes 12 and 14 i am stumped and angry ...

Ad

sensor,crank shaft sensor, fuel filter speed sensor reading must be accurate. then pcm must be able to read it. outputshaft speed sensors can be checked with a DVOM on mV. get your data for testing at

Ad

Question about Jeep Grand Cherokee

2 Answers

...replace the crank position sensor and the cam position sensor. Check the wiring for the Oxy sensor(s). And if all else fails then change the PCM. The codes you mention 301-302-303 are all misfire in ...

...replace a year ago by a repuable shop. Any other shifting is tight and works correctly. At one time the RPM's went to 0. then returned to normal. After that, the jeep ran and shifted normaly. ...

Question about Jeep Grand Cherokee

1 Answer

...crank sensor threw #3 misfire code, replace coil which was burnt out (huge crack in side of coil), coil burnt out ecm, replaced ecm had it flashed at dealership, drove till it got hot and burnt out ...

...crank, and throttle position sensors should be. I'm seeing on here to replace coil pack or coil housing...i need this car running!!! Someone please help!!! Resistance check the coils. Check for spark ...

Question about Jeep Grand Cherokee

1 Answer

...crank sensor and I know that it has something to do with fuel cause I crank the engine over and spray carb cleaner through the air intake while cranking the engine and the engine will stay running as ...

...Crank sensor is dead get a new one have it replaced/ Cam sensor controls gas / Crank sensor controls Spark Delinquintd: I have the same problem but I have a manual tranny. Engine ran on old car then ...

car stop running while going down road want crank back up it fires but acts like not getting fuel replace the crank position sensor and/or the cam postition sensor

Question about Jeep Grand Cherokee

1 Answer

...227106 km on engine, do you thinks it the timing chain ? need help its been huge probelm when you replace crank sensor the crank sensor is going have to be reprogram or relearn before car will

Not finding what you are looking for?
2003 Jeep Grand Cherokee Logo

1,568 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...