1996 Jeep Grand Cherokee "grounds light" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

Back right light does not work whent the head lights are on - works when brakes are on. - light is good - sounds like a bad socket or a bad ground to socket.try wiggling bulb while lights are on to ...

Ad

...and test. looking works best first. and for hacks, (trailer light hacks) or collision damage there. yup, look first. every time. clean grounds, then last use a voltmeter to find all the hard

Ad

Question about Jeep Grand Cherokee

1 Answer

rear tailight , top, goes off when I press the rear tailight , top, goes off when I press the brake pedal. Thought it was the bulb but I just put a new one in and the same occurred????? It lights for ...

Question about Jeep Grand Cherokee

1 Answer

drive side brake light works when headlights are off ,but when headlights are on,it doesnt,wondering what is causing this? There is a bad ground in your tail lamps. The brake light works with the ...

left rear stop light goes out when braking with lights on Have checked all fuses they are ok. swap tail light assemblies and the same problem still occurs.only happens on driver's side. you need to ...

JUST REPLACED THE SOCKET FOR THE REAR PASSENGER BRAKE LAMP WITH A BULB, NOW THE BRAKE LAMP IS STILL NOT WORKING you need to check for ground, get a long wire and hook one end to the battery ground and

i am not getting power to my trailer lights on my 1998 jeep grand Cherokee I would unplug the wire harness and check the contacts. Even if the contacts look good , Scrape them shiny then spray with ...

Question about Jeep Grand Cherokee

1 Answer

Flashing Headlights/interior Lights i have a 2006 Jeep Grand Cherokee. Here recently the headlights have started flashing while in the on position and the interior lights also....but this past weekend

Question about Jeep Grand Cherokee

1 Answer

left brake light doesn't work First, remove tail light or gain access to bulb from behind. Using a voltmeter to check for voltage and proper ground at the socket. If power and ground are correct ...

Question about Jeep Grand Cherokee

1 Answer

One brake light does not work, I replaced the bulb, there is power to the tail light housing. Is it possible to have a bad socket? The brake lights go thru the turn signal switch which could be bad ...

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

4,552 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...