1996 Jeep Grand Cherokee "change lifters 3" Questions

Ad

...3.7L Have code of P0304. Says its misfire of cylinder 4. Changed all 6 spark plugs. Still have light and code. Want to change ignition coil for cylinder 4 # 4 cylinder is the middle cylinder on the ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...3 quarts which is less than what it takes to make it full. On some engines it takes 5 quarts of oil. You will have to check the dipstick to see where you are now compared to the full mark. If it is ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...lifters and pistons (cylinders). This is an excellent (cheaper) alternative for premium fuel use (assuming your vehicle does not require Premium). If it does require premium, and the MAS is good, ...

Question about Jeep Grand Cherokee

1 Answer

...change the lifters is about 4000 miles ago. it sounds like your oil pump is not working good. check oil pressure at cold and what weight oil are you using. it may be too heavy for it to get up to the ...

Question about Jeep Grand Cherokee

1 Answer

...lifters was bad and i needed to change all 12 of them @ $27 a piece, then $140 for 2 hours labor which came up to $464 b4 taxes. I have two questions. How many lifters are on a 200 Hyundai accent? If ...

Question about Jeep Grand Cherokee

1 Answer

lifters an cams what is the fireing order for a 3.2 v6 cylinder1991 legend am changeing out some lifters an cams i need to no the fireing order before i start The firing order on your car is 1 4 2 5 3

...lifters is normally take all clearance out of rocker arm to lifter plus an extra 1/2 to 3/4 turn. I used to do this with the motor running, I would adjust it tighter till it quits rattling and then ...

Question about Jeep Grand Cherokee

1 Answer

...change. any advice? more than likely you will need new lifters but i have gotten away with substituting 1 quart of atf for one quart of oil on an oil change that seems to work good and make sure you ...

...change, or the noise comes & goes.  try changing the motor oil & filter right after adding an Engine-Flush Treatment to the motor oil, running the engine for 10 minutes at idle with ...

...change the oil/filter again and add another treatment of Seafoam. After 3 treatments you should not hear the lifter noise any longer if it was caused by carbon or varnish buildup which the Seafoam ...

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

4,552 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...