...problem with the code P0700. Can you tell me what that means exactly? P0700 means there is a transmission fault code in the transmission controller. Since the transmission controller doesn't ...
cherokee 1998 transmission problem Hi, can you help me to fix my Cherokee transmission problem? It is not moving from third gear. Hello Is it the shifter not moving or is it the transmission staying ...
...pressure switch circuit- this is set if pressure switch doesnt close on command from the TCM(transmission control module) There are wide ranging possible causes: open in trans control relay ...
problems because my bighorn isuzu model 30-40le transmission has a problem on forward and reverse.... the transmission cable might have been broken/cut. if it is using fluid. the cap could be worn out
...problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other ...
1997 Jeep 4.0 auto transmission I have an issue I believe to be in the transmission. When coming to a stop the trans disengages and I have to rev engine a couple of times to get gear in place to drive
Question about Jeep Cherokee
...problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other ...
will not shift to overdrive code is po705 The Transmission Range Sensor circuits have a problem. It could be a bad Transmission Range Sensor, A poor connection or damage to one or more of the wires to
...to be slipping and the revs go high without much motion. Can you help OK, slipping is an internal transmission problem. If the vehicle has not been on the road for a long time, I suggest that you
414 questions posted
Usually answered in minutes!
1,380 Questions
1,162 Questions
698 Questions
672 Questions
659 Questions