2001 Isuzu Rodeo "remove transmission oil" Questions

...filter in a 1999 isuzu rodeo Drain transmission fluid. Remove transmission oil pan. Remove and replace transmission filter. re-install oil pan with new gasket and refill with new transmission

...remove the oil pan then you'll see the transmission filter with socket wrench using a 10 mm socket remove the filter and the same way replace it with the new filter don't over tork the screws tighten ...

...transmission oil filler gap... it is ussualy plug that can be removed with a ratchet... stick your finger in there to make sure that the oil level is close to the opening.....it is....then it is cool ...

...oil or transmission fluid transmission oil is red pull the dipstick out & check the color, also the transmission dipstick is a lot longer than the engine dipstick......hope this helps.....cheers ...

...transmission fluid you have to remove the pan from the bottom of the transmission. If you are going to do this anyway, make sure you pick up the correct Type of transmission fluid and a transmission ...

...transmission fluid on 2000 Isuzu rodeo howw to check transmission fluid You should be remove big hexagonal screw on transmission gear box, transmission oil level should be same as that screw hole

remove and pump it in...is this possible With an automatic transmission you will have to drop the transmission pan and replace the pan gasket and filter on the pick-up tube. You will not however drain

...transmission in park. Remove the upper plug fron the transmission pan. If fluid drips out it is full. If not add fluid to the hole where the plug came out. A hose with a 90 degree plactic or other 90 ...

...remove the transmission out of a rodao kbd 4wd you post with no year, and want help> really? manual (stick) or slush pump, A/T cant guess that either. you want all 25 steps? why not get the FSM ...

...transmission you are dealing with-but I suspect it's a manual trans. To check gear oil level-crawl under car and look for a "plug"-it usually has a four sided wrench flat-or-it will have a "square" ...