2000 Isuzu Trooper "change cam belt 3" Questions

...needle nose vice grips to hold the belt in place on each cam pulley. you should be able to finish this job in 3 - 4 hours as long as you know what you are doing and own some metric tools. Good

change it even if you want to....Number 6 cylinder coil is longer than the others. Check fuel pressure, ck scan data. there isnt much you can do without a scanner. Was timing belt been done before you

...cam belt.
the all time #1 reason to cause horrid low compression and timing totally wrong. (spark time will be way off if cam slips , a TOP EASY check clue that....)


i check spark ...

...cam belt cover to check that cam gear is timmed on mark at 12 O clock there is notch in edge of flywheel that should be put at 6 O clock (facing down) it is hard to see with flywheel on engine look ...

cam belt top cover and check timing mark aligned up with mark at 12 O clock then flywheel has small notch in edge that must go at 6 O clock (facing down) look closely it is hard to see due to flywheel

...change the sensor. when i try to drive the truck it doesn;t want to go its like its straining and it will go in low, i know its not the transmission cuz i just had that replaced bout a year ago. any ...

cam belt that must be changed, did you. or going for the 100,000 mile world record?hahahah the 2.0 is chain, so nows that time to fess up and tell us what engine is there. (about 9 engines world wide,

how often must the cam belt be changed Does the BMW 318i have a cam belt? and if so when should it be changed? 1) No. 2) well it's not there so......you'll get it.

...cam belt, OK. Crank Engine, without HT connected. No change in Crank RPM with OPEN/CLOSED THROTTLE. --Vacuum Leak? Checked for fuel flow by removing sparkplugs but laying them each above each port ...

...cam is change drive on all j18 engies you lost parts? cant guess your job,or history. say the job first , then ask a question. cam chain loose and making huge noise? or is the the fan belt. the G16 ...