1999 Isuzu Trooper "timing gear marks picture" Questions

timing the belt of isuzu 4jx1 before you remove belt time mark on cam gear as well as crankshaft pulley, the timming mark on the pump drive gear (lower gear in this picture) will not line up but thats

...those to align the cam gear timing marks to. If no marks on the valve cover then point the cam gear timing marks at each other as per the pictures then align the crankshaft timing marks as

gear. Then the silver link should be down at about 5 O-Clock on the crankshaft timing mark. The other silver link should then be aligned to the mark on the exhaust cam sprocket. See picture below. For

...gear should point directly at the mark on the engine at the 12 O'clock position. Once the timing belt is installed and the tensioner is set, rotate the crankshaft 2 full turns to verify proper ...

...gear face. remove belt ,lay new belt edge to edge and transfer marks exactly onto new belt slip new belt onto cams n crank verify everything is matched to old marks if tensioner is adjustable dont ...

timing marks on the chain and gears The marks are often either an indented dot or a straight line, and it will be the same mark on both gears. Make sure they line up perfectly, because being one tooth

timing mark on crank gear only cam!how can I time without that crank mark? I am assuming your working a GX670 twin cylinder small engine. There should be small dimple on the crankshaft gear. It is 180

...timing mark on the crankshaft gear that lines up with a pointer and the cams should have marks that line up also. Most of the time there is a molded line in the cam gear and it lines up with a molded ...

...timing marks on both gears. The camshaft and crankshaft Marks face each other mark to mark when installed. I tried to print the picture but it comes out to dark to see. Should you need further help ...

...timing marks.The camshaft mark aligns with the mark at top of cover behind the cam gear. The lower mark aligns with the notch on the block and the crankshaft key way is at 12:00 o'clock. See the ...