1999 Isuzu Trooper "gear marking" Questions

4jx1 camshaft marks on isuzu trooper 2001 3,0 dohc engine the timming gear that the belt runs on has a mark (V cut in gear) to rear cover at about 12 o clock and crank pulley has timming mark for top ...

the front of the vehicle. 014RY00042 Legend (1) Crankshaft Timing Pulley (2) RH Bank Camshaft Drive Gear Pulley (3) Water Pump Pulley (4) Idle Pulley (5) LH Bank Camshaft Drive Gear Pulley (6) Tension

I pulled the timing belt off and both cams moved. you will have to turn the engine to dead on cylinder one. and then realign the cams. i dont have access to that particular model but usually there are

...dot, left bank with 2 dots on the shaft itself. To align the camshafts to each other each cam shaft gear has a mark on it. Draw an imaginary line between the centre of the camshaft and the centre of ...

to sincronize the timing belt of my isuzu tropper 3.2 sohc if this is 6VD1 engine it has single cam gear each head, but is still a 2 cams per head, engine if belt has broke or you have turned any gear

diagram of markings on timing belt I repaired a 3.1 4JG2 but the mechanic doesn´t know how to set the injection time. I can see the marks on the crank and camshaft as well as the inyection pulley

timing isuzu trooper to know how to time trooper.Which marks to use and where they align to marks I just changed the belt in my 2002 Trooper. The new timing belt will have marks on it probably thin ...

...v-6 dohc camshaft timing marks pulled camshafts to do valve job and need to align marks on drive gear and cams It's more to it than aligning the marks since the cam pulleys turn about three times ...

...wheel when belt breaks they dont bend valves but you need to remove both rocker covers to align cam gear mark and have cam lobes in these ...

how to timing the belt of isuzu 4jx1 before you remove belt time mark on cam gear as well as crankshaft pulley, the timming mark on the pump drive gear (lower gear in this picture) will not line up ...