1999 Isuzu Trooper "4jx1 back" Questions

back and bleeding. looking for a fuel temperature sencor for my 4JX1 engine. can you assist in looking for a suitable supplier. sanil, fiji You probably need to enter the new injector numbers into the

...4jx1 engine this is a USA forum what country are you in? Fuel systems vary by engine, and country, so......????? what needs fix'n? the word fix has many meanings how to rebuild the pump? time it? how ...

how do you put cams back in 4jx1 after splitting them apart ? woow do the reverse just how you took it apart do it backwards now

why the diesel mixed in engine oil for isuzu bighorn 4jx1 ,how to fix? lots of ways. all bad. someone poured it in is 1. (jiffyboobs?) extreme engine flooding may be one way, on a very worn ...

...4JX1 diesel engine has a belt . 4JGE is a different engine completely. To change it set #1 on tdc fireing stroke using the mark on the back lip of the crank pulley (sit it at 12'oclock) and see the ...

...back on and oil gauge shows no pressure at all. if you have a 4jx1 3.0 engine then the engine wont run properly because engine oil pressure is what drives the direct injection system. Check for ...

...4jx1 engine just removed the flywheel and would like to fit it back while the bolt holes appear to be symmetrical you will probably find that all but one will screw in easily you may have to turn the ...

...4JX1 fuel black My trooper would fire then die in mornings but would eventually start.Start ok when hot. removed fuel filter and it was full of black fuel! new filter fitted and started fine but what ...

...back on here for how to time them up . 2003 Isuzu Trooper 4jx1 3.0 liter diesel engine with skyroof here in Las Pinas, Philippines. Bad engine after 100kilometers. Engine oil and Diesel mixing ...

...4jx1 they have also a timing mark in the flywheel? thank you yes auto or manual vehicles must have the flex plate (Auto), flywheel (Man) installed in correct position while engine is at top dead ...