2000 Chrysler Town & Country "passenger side" Questions

Passenger side window stopped working, is this a fuse problem? Driver's side is still functional. It's not a fuse issue. Can you roll the window to the passenger side down with the drivers side panel?

...passenger side is blowing cold, the driver's side isn't. Changing temperatures on control didn't help. Today's high was an unbearable 109, but since the passenger side is very cold, ...

passenger side dont work the window then this would point towards either motor or regulator at fault, if the drivers side and passenger side switch are the same then you can swap the switches over all

...passenger side Hello, I have a 2004 chrysler town and country, with the heat on all vents blow hot air except the passenger side,which blows cold. I have climate control on the car. but it also does ...

...passenger side floorboard gets wet = the passenger side floorboard gets wet in hard rain in our 2005 Town and Country is it only when the ac is on? there is a pan under the ac unit that has a hole in ...

passenger side power windows don't work Can the driver side's power window motor assembly etc. be replaced wthout replacing the passenger side's power window motor/regulator assembly? yes they are two

...passenger side but not that cold on driver side there is dual temp control If there is a dual temp control, set it in the middle so that both sides will have equal temperatures. Otherwise, may have a ...

...passenger side door by sticking her hand in the window the alarm system went off and now I can't crank up the car. what do I need to do to get the alarm off so the car can run???any suggestions would ...

...passenger side window went down and won't come up. All other automatic windows and door locks work fine - don't hear any motor sound / buzz / etc. when either driver side or passenger side switch is ...

...passenger side blows cold air There are separate blend doors for the passenger and driver's side. The blend doors divert, not block air, so it is unlikely that the blend doors are the problem. Your ...