2000 Chrysler Town & Country "not turn key" Questions

turn the key but do both at same time turn wheel little bit then turn key while holding wheel in that possition. if not then push key inward while turning maybe it has one of them goofy switches. last

...park the ignition key will not move to lock position and the key will not release. Usually after turning the engine back on and moving thru the gears several times the key magically turns to lock ...

...turn the key just to the on position and the the engine starts to turn over, but will not start until you turn the key all the way to the start position. It has been doing this for a few days and now ...

...key to turn. This is a very simple and inexpensive fix. If you look at your steering wheel on the underneath right side of your ignition you will see a small hole small enough for the tip of a pen to ...

turn the key all lights come on but will not start hi.. Many cars these days are equipped with an immobilizer. (you can find more information about the immobilizer in your owner's manual). The ...

my key will not turn over the ignition, help? if you are saying you can't turn the key... try jiggling the steering wheel as you turn the key

...turn the key to the on position without turning the engine over for about 5 seconds. Then turn the key off. Turn the key back to just the on position again. Turn the key off. then try and start it. ...

...key should turn now. Thanks. you can rate this solution and show your appreciation. First try rocking the steering wheel back and forth while trying to turn the key. This may work if the steering ...

...turn key off and on several times and it starts engine turns over but will not start turn ignition key on and off 2 or 3 times and it starts Use a gage and check proper fuel pressure. Cycling the key ...

...Key and turn the ignition switch back to the ON position. The second valid Sentry Key must be inserted within 15 seconds of removing the first valid Sentry key. About ten seconds after the completion ...