...Starter wont engage 2. will start and run if I remove switch and the electrical switch and turn the the ignition block with screwdriver 3 Had locksmith clean the key switch you need new ignation ...
Question about Cars & Trucks
...ignation switch with the keys that don`t have chips. Motor turns but won`t crank. Also keys won`t come out of the ignation unless thr ignation is unplugged. It's not going to start without receiving ...
Question about Chrysler Town & Country
...ignation switch, to find out, when car wont start some one have to check supply at starer solinoid small nut mounted wire, if supply is there then you can go to check if any relay is there before ...
...many thanks steve If you can not find the problem is, maybe you can wire directly from your fuse box 12v to your radio hot wire, and use your radio switch turn on and off, omit the ignation
ignation switch won't turn on, dodge 2003 intrepid ignation switch won't turn on, the switch turns only about 1/10 of the usual operation distance, I removed a conector going in the side of the switch
reset only for jeep oil change light 1997 5.2 turn ignation on engine off fully depress accelerator to the floor 3 times in 10 seconds turn ignation switch off thats it.....good luck
ignation is not working gas is coming but ignation is not working Change the ignition switch then
Question about Cars & Trucks
when i turn on the ignation switch the ignation light want come on no power at all? is battery dead? charge it back up..
... connect through the ignation switch.... which will put off the radio every time you switch off the ingation key. All you have to do is re-wire the power connection through the ignation.. Regards ...
...ignation tumbler. I have a new tumbler but I can't get the old one out. You have to remove the steering wheel, and the turnsignal switch, and you will see a torx bolt that retains the tumbler. you ...
765 questions posted
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,079 Questions
746 Questions
666 Questions