2000 Audi A6 "colours bleeding" Questions

audi a6 2.8e keeps over heating the fan on the first speed does not come in.The water is pushing out the cap.Did replace the water pump,pressure cap,fan switch,bleed the system no air in system Sounds

...by the motor for the heater controlls wich are coloured orange white and grey but may be other colours, lubricate with wd40 lightly and check there is no water leak from heater radiator.Mine ...

need the brake lines coming from the master cylinder for a 1986 gmc1500 pick-up. Are they available as ready to install? Certainly you can go to a GM dealer and they will sell them to you preformed...

my 1999 chevy tracker 78k miles rear drivers side leaks a fliud and makes a light scrubbing noise brakes and drums were replaced it may have something to do with 4wheel drive axle i was told has ...

MY VOVLO TRUCK FL6 IS MISS FIRING AND HAS NO PULLING. I HAVE CHANGED THE FUEL ELECTRIC PUMP BUT ITS DOING THE SAME Hi Michael, Is the engine throwing out smoke and if so is it a light grey? That ...

I finally found where the break fluid container is on my 95 tracker, it was filthy so I cleaned it and I see a minimum line and a max line, but I can not see where the fluid is. What color is break ...

replaced T-stat, engine overheats and no heat can it still be air bound with the radiator cap off? just squeeze the upper rad hose and the heater hoses a few times to work out the air.... not sure how

I have a break leak and coolant leak. I know this because both fluid holders I've had to fill; now it's hard to shift. How do I fix these? you will have to check for were the brake and coolant

I have a 87 toyota pickup,the pressure plate seems to be ok.I tryed bleeding the line,but the peddle just went easer to the floor.No pressure at all.Don't see any leak.Has me lost,can you please help!