2000 Audi A4 "hazard stop light fuse" Questions

...light bulbs are okay as my indicators are working fine. Is there a fuse that has gone bad or some other issue? When the problem started - left side lights used to blink intermittently but they have ...

My turn signals are not working, My hazards still are. I just installed a remote starter so spliced into what I thought would be the parking brakes. (lights turn on once the car starts) Signals were ...

...the fuses under the hood and the all were fine is their another fuse box somwhere that has a fuse just for the hazard lights. i bet you have a bad multi function switch or turn sig switch. good ...

...fuse blew. Note - with the hazards on I (one by one) took the light sockets out and could see that all bulbs were working (hazards on) and it appears as though (with bulbs not taken out) corrosion is ...

...there is power and earth to switch then replace ur hazard switch its faulty but if there is no power and earth to switch then it has whirring problem hazard lights stop working on pajero indicators ...

...hazard lights would stop and I would need to replace the fuse. So a while ago, when i was doing a left hand turn signal, water would be sprayed on the windshield until the left hand signal stopped. ...

...stop/hazard fuse keep blowing in my 98 chevy Silverado k1500 causing no brake light or hazards Fuse keeps blowing for brake lights and hazards. Have tried high amp and still blows. Have tail lights ...

...hazard flashers I rented a trailer; it shorted the trailer 40 Amp fuse, 20 Amp stop light, plus the brake lights. Replaced all fuses and installed new lights, everything works except the hazard ...

...hazard module then supplies voltage to both of the trailer rear turn/stop lamp supply voltage circuits. The voltage from the CHMSL 10 A fuse is to the center high mounted stop lamp (CHMSL) and the ...

...to check the fuses and they were fine i also took them out 1 by 1 and they were all fine any idears??? wiggle the hazard light switch and see what happens ,turn indicators on and then wiggle the ...