2000 Acura TL "ice stopping wiper" Questions

Ad

half way and stop, they would only work in continuous mode. now the wiper fuse keeps blowing weak or faulty wiper motor, or wiper motor under heavy load, clean out snow ice and debri then retry wipers

Ad

...ice thay go all the way down and shut off The wiper arm isnt able to go all the way down and make up the limit switch. So the computer thinks something is wrong and cycles the wipers again. This ...

Ad

Question about Acura TL

1 Answer

2005 trailblazer I turned on my windshield wipers to clear away some ice, and the wipers haven't stopped going yet, can someone tell me how to make them stop? is there ice or an obstruction preventing

The wipers keep icing up while driving. We had to stop several times to clean the ice off the wipers. The only thing that might help some with that is to keep your defrost vents on high to keep the ...

Question about Acura TL

1 Answer

...wiper motor, when ice melted I restarted the wipers and I lost all but reg and high speed where do I go from here? the wipers also do not seat in the stop position. You screwed up the wiper motor ...

Question about Acura TL

2 Answers

...stopped where they are. There is a good amount of ice around the base of the wiper arms, could the ice be the problem ? Hi Good chance is you wiper motor is blown. check the motor Wiper motor is ...

...ice or frozen to the windshield, you may have blown the red 10 amp fuse located in cavity 9 in the fuse block located on the bottom left side of the instrument panel near the parking brake pedal. In ...

I have a 2006 Range Rover HSE, they forecasted ice for the next day, so I turned on the wipers and stopped ... I have a 2006 Range Rover HSE, they forecasted ice for the next day, so I turned on the ...

the wiper assembly that you may have bent when clearing ice from the windshield. (I didn't think I was that strong, or that rough on my wiper are, but my dealer said it was very common in 2002 models.

stopping point of widshield wipers? in an ice storm, I turned on wipers and they got stuck. When I turned switch off the stopping point had changed so that they are not at botton of travel when turned

Not finding what you are looking for?
2000 Acura TL Logo

690 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Acura TL
1999 Acura TL

415 Questions

2004 Acura TL
2004 Acura TL

357 Questions

2003 Acura 3.2TL
2003 Acura 3.2TL

278 Questions

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...