2005 Acura TL "39 key jeep ignition park" Questions

Ad

39;t the key release when it is in park? Ignition switch won't release key when it is put in park. But when I removed switch and key tumbler, the key tumbler/cylinder releases key. Why won&

Ad

Question about Acura TL

1 Answer

key Put the vehicle in park, or neutral and try again.This is likely an issue with the gear lever's position switch, which sends a signal to a solenoid on the ignition, which allows you to turn it

Ad

Question about Acura TL

1 Answer

...key will not come out When you shut the vehicle off the key will not turn all the way to the spot where the key can be removed. make sure it's in park, check for  release switches, turn ...

...key is seemingly mysteriously prevented from being twisted to the "Start" position in the ignition, it is probably due to the transmission not being fully in "Park" (or in neutral or clutch fully ...

39;s..And still no start and run, I was than told by the tech. I needed a new PCM or ECM. I sent my computer to Cardone to rebuild my computer, They returned my pcm saying there was nothing wrong with

Question about Acura TL

1 Answer

...key. Replaced ignition switch but will only start when the relay is engaged from the PD box. This could be a faulty park/neutral safety switch. This is a switch that is used to determine whether the ...

Question about Acura TL

1 Answer

39;s computer. This can be done in the following manner: ** Firstly, attempt the first part of the procedure with engine running ** - With gear lever in PARK, start engine and rev up to 2,500rpm, then

...key in ignition and it stopped and 10 minutes later repeated over and over...it's doing it now! HELP! This could be three things. 1. The relay is stuck, this is under the hood and is probably ...

...39;t the issue.  I have noticed if i have the doors shut and wait for the dvd for the nav system to stop reading and then turn the key and hold it, with in 2 or 3 seconds it kicks in and starts ...

Question about Acura TL

1 Answer

...39;t getting power battery terminal connections looseor corroded.Check the cable terminals at the battery.Tighten the cable and remove corrosion as necessary.Battery discharged or faulty.If the cable ...

Not finding what you are looking for?
2005 Acura TL Logo

312 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Acura TL
2000 Acura TL

424 Questions

1999 Acura TL
1999 Acura TL

415 Questions

2004 Acura TL
2004 Acura TL

357 Questions

2003 Acura 3.2TL
2003 Acura 3.2TL

278 Questions

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...