2006 Jeep Grand Cherokee "codes" Questions

Ad

...55 when I turned the key 3 times. Can you tell me what that code means? Code 55 indicates end of codes. If you are retrieving codes, code 55 will indicated that you have reached the end of the

Ad

Question about Jeep Grand Cherokee

1 Answer

...whats code 33 4x4 Grand Cherokee... - 1993 at 1998 also called ZJ series has OBD I code with two codes... Trouble Code/Chrysler - 1999 at 2004 also called WJ series has OBD II code with four

Ad

...Should cool off the injectors so they work properly again. Have you checked to see if there are any codes coming from computer? With the key in the ignition, turn it from off to on three times (not ...

Question about Jeep Grand Cherokee

1 Answer

I did a diagnostic check and it came out with codes 12 13 and 54. What do I need to do to get my truck back up and running? code 12 means the battery was disconnected within the last 50 key cycles. ...

Question about Jeep Grand Cherokee

1 Answer

2008 gracherokee hemi and i had problem i had problem with thes codes so pleas i need help for engine light came on and i cant start my engine with my remmot control codes are ...

Question about Jeep Grand Cherokee

1 Answer

getting blink codes 12,11, 55 Will not start seems to be getting fuel and is turning but no spark even with new rotor cap, and coil. Getting codes 12, 11, and 55 Code 12 - BAttery disconnected ...

code 463 fuel level sensory high imput, what is this and where is it located Not sure if this helps or not, but here is information from the 1998 Jeep Grand Cherokee Service Manual, ezg_25.pdf, page 6

Question about Jeep Grand Cherokee

1 Answer

...just to the point where the dash warning lights come NOT Engine Cranking). Now diagnostic trouble codes will display where miles is normally displayed in the odometer. Write down these codes. Note- ...

Question about Jeep Grand Cherokee

1 Answer

...Ignore this code, it is normal when the battery is disconnected. Code 55 = Completion of diagnostic codes. 55 means end of code messages. Ignore this code. Code 27= An output driver within the PCM ...

...is erased I took my car for a diagnostic reading and a tune-up. The Tech said he could find any codes in the system. Why would the codes be erased and can I still get a good tune-up without the ...

Not finding what you are looking for?
2006 Jeep Grand Cherokee Logo

961 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...