2003 Jeep Liberty "rear flip glass" Questions

...shaft. Then get yourself a battery cable puller (from auto parts store) and pull the arm off of the shaft.. 1 - SPARE TIRE 2 - WRENCH 3 - FLIP-UP GLASS 4 - PARK RAMP 5 - REAR WIPER ARM 6 - PIVOT ...

...flip-up glass latch connector receptacle. Disconnect the tailgate wire harness connector for the rear wiper motor from the motor connector receptacle Loosen the two screws that secure the rear wiper ...

...rear gate is open, would illuminate the interior lights and set off the car alarm when you locked the door with the remote. The problem is that water is entering the gate near the flip up glass. The ...

...rear hatch will not lock at all. I can flip the switch inside of the hatch by removing the 5 X 5 panel and reaching my hand inside. After doing that the door will stay locked however otherwise it ...

...flip the rear wiper on, it just creates a mess that I can't see through. How can I fix this? Any help would be appreciated. Thanks. Inspect The Window Coils Look For Any Kind Of Gap Anywhere. If You ...

...flip up. Remove nut at top rear corner. Remove Nylon/plastic push lock rivet where seat belt goes through panel... top corner. Pull panel off mounting pins...will sound like your breaking it ! Lift ...

...glass at the opening, insert the hinge studs in the B-pillar holes, and install the nuts. (3) Attach the latch to the rear side panel with the bolts. Tighten the bolts with the latch in the lock ...

Jeep rear glass lift gate won't latch closed. Bounces off. Push the open button and flip lat to open osition . . Sounds like it is the closed position

...rear wiper arm on a 2011 Honda Pilot? Do you want to remove the whole arm or just the wiper p blade for replacement. if the whole arm, the at the base of the arm, flip up the plastic base, you will ...

...flip up. remove nut at top rear corner of side panel. you can see the back side of the nut and bolt it is on from the panels that flip up. Remove Nylon push lock rivet where seat belt goes through ...