2001 Jeep Cherokee "gear ratio working" Questions

...ratio why is it on the gear stick? yes, it has 4 low. you might need to get the linkage adjusted. if that doesn't work, then there are pads on the shift forks insde the transfer case that might need ...

...cyl engine) works fine, then when the jeep has been driven for a while it seem that it slips out of gear. The engine races to 3500-4000rpm and the car goes nowhere. Pull over and sit foe a couple of ...

gear ratio must exactly match the ratio of the one in the rear or the transfer case will fail, so either use the matched set from the donor or make certain that the front matches the rear from the 2wd

po715 is a drive speed sensor the same as an input/turbine speed sensor I do not believe so . Code p0715 if that relates to your question refers to the turbine shaft speed(TSS) sensor-circuit ...

...cars have a safety switch that impedes the operation of the starter motor when the car is in any gear other than park or neutral. I believe it is called the neutral safety switch. Sometimes this ...

...gear ratio of the gears (mechanical advantage). If you apply 100 lb-ft of force on the input gear of a gearset that has a 3.5 to 1 ratio, you will get 350 lb-ft of torque from the output gear ...

...gear ratio bought another 321 gear ratio rear axle at yunk yard looks different it has spring in the cover where the gear are Will it work have a 5.2 engine One axle may have an open differential and ...

...Gear Ratio P0732 Incorrect 2nd Gear Ratio P0734 Incorrect 4th Gear Ratio P0736 Reverse incorrect gear ratio The codes you have are all gear ratio error codes fordifferent gears. The most likely cause ...

...Gear ratio is different. What was yours??? You can put any gear ratio in it you want. Difference would be speedo numbers. To get rid of the positrac. Remove the two pins and related parts that the ...

...gear ratio's It should work fine, as long as the final drive gear ratio is the same. Even if it wasn't, it would still work, but then your speedo would be off. (Ratio MUST be the same if ...