2000 Jeep Wrangler "system mechanic won 39 start" Questions

Ad

Question about Jeep Wrangler

1 Answer

...won't start.Codes P0351,P0352,P0353,P0300,P0302,P0305.It is a 4.0L with manual trans.Any help would be greatly appreciated. Trouble Code: P0300Multiple Cylinder Misfire Detected Possible ...

Ad

won't start back after about 10 minutes fires right back up. ??? any ideas as to what is wrong with it. The following are the general instructions on the start of diagnosing any electronically

Ad

is aftermarket, call the company that installed it. If you have a mechanic you trust, you are free to ask them for advice, but typically mechanics will refer you to a dealer for security system issues

...mechanic friend who told him he did it correctly. the gas guage is working. If this is a diesel engine you probably have an air lock in the fuel system. It will need "bleeding" before it will start. ...

Question about Jeep Wrangler

1 Answer

...Mechanic said changed fuel pump, spark plugs, and wires. Stalled today one week later wouldn't start. Now he says it's anti theft sensor?Paid $500 and do not want him touching sensor ...

Question about Jeep Wrangler

1 Answer

...system problems: If the spark plugs, ignition coil, or ignition module are not working correctly, then the engine may not be getting the spark it needs to start. You can check the spark plugs and ...

#39;m stumped what to do Does the van have an anti-theft system ?If so you may need to reset it.If not, a mechanic would check for voltage at the starter, the neutral safety switch, and the key switch

...system check..they'll do it for free and you'll know for sure what it is. And if you end up needing a battery they'll install it for free. Next in line is the Alternator and that may be ...

Question about Jeep Wrangler

1 Answer

...is not faulty.  The passkey system reads a chip in your key.If the security light is not on, a mechanic would check for voltage at the starter, the neutral safety switch, and the key

Question about Jeep Wrangler

1 Answer

mechanic. engine cranks but doesn't start You need to check the electronic engine control system for fault codes and do the appropriate diagnostics for the codes received, learn how to do that

Not finding what you are looking for?
2000 Jeep Wrangler Logo

491 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...