Question about Isuzu Trooper
...set the timing mark between timing belt and camshaft drive gear pulley and put the timing belt on the camshaft drive gear pulley. Secure the belt with a double clip or equivalent clip. NOTE: It is ...
...set timing? 1996 trooper 3.2 For all timing belts you should start with the crank sprocket pointing at TDC and the cam sprockets pointing at their designated marks. You should be able to mark the old ...
...timing belt I repaired a 3.1 4JG2 but the mechanic doesn´t know how to set the injection time. I can see the marks on the crank and camshaft as well as the inyection pulley but if I try to ...
...timing belt ? Here are diagrams for the timing belts and the timing marks for replacing the timing belt on the 1998 Isuzu trooper. Hope this helps. ...
...timing belt cover. Rotate the crankshaft to set the engine at TDC/compression for the No. 1 cylinder. The arrow mark on camshaft sprocket aligns with mark on the rear timing cover. Remove the ...
...be You must have #1 on TDC and the camshafts on the timing mark to fit a new belt , I rekon yer valves are fouling the piston . Ignore the mark on the pump pulley . timing belt set wrong hitting ...
...set #1 on tdc fireing stroke using the mark on the back lip of the crank pulley (sit it at 12'oclock) and see the mark on the camshaft bearing matches the notch on the pulley .Ignore the marks on the ...
set to time when the belt is put on, the computer adjusts the advance and all that stuff the dist used to do. Did you just change the belt? Dd you line up the timing marks? If it is not running right,
...timing marks in each 4 camshafts. 1 punch mark and 2 punch mark. Sorry for the severe delay. I am personally going back to answer your unanswered question. I do not know if you still need the answer, ...
388 questions posted
Usually answered in minutes!
480 Questions
463 Questions
423 Questions
323 Questions
317 Questions