...2 or 3 times. could it be a relay, crankshaft position sensor, or something screwy in the steering column? Truck runs smooth during the 15 seconds and there don't seem to be any other side effects. ...
Question about Nissan Cars & Trucks
...2 in the tank, 1 is sock filter +1 main filter and each injector has a 10micron filter inside. sorry that be all facts. well doing the tests wrong causes that, confusion. we test fuel pressure at the ...
Question about Isuzu Trooper
...test to find cause. not me guessing. okk? no MILES on car told. 100k 150k ,2ook are you ignoring the cam belt v6 , not replaced at 60 to 100k miles and if snaps engine is now a wreck.????? means this ...
Question about GMC Cars & Trucks
2: ECM good (i bet yes) 3: CKP and CMP senors dead. 4: if the ECM sees spark dead it cuts all fuel to prevent as seen on TV "CRASH AND BURN" and by LAWs on this fact. 5: some cars have Injector buffer
...2. Check the fuel pressure: If the fuel rail test comes back with low pressure, this could indicate a fuel delivery issue. Check the fuel pressure regulator and fuel filter to make sure they are ...
...2 minutes what is wrong. Most small workshops have a hand held unit they can carry around and test without to much trouble. This can be expensive but save you a lot of time and money replacing items ...
...2 bolts on most) and take it to autozone. They can test it in minutes for free. Either that or the ignition module but more common is coil. My OD wont disengage after Ive been pulling a trailer for ...
...2 to 5 cranks to start. Each crank turns the cars electrical stuff on and revs the engine however it doesnt start.What is the issue? Either you are not getting spark or not getting fuel. A bad ...
Question about Isuzu Cars & Trucks
...2: fuel rail drips or not.
3: 12vdc missing to pump or not, cranking?
The pump needs 12vdc (11v) when cranking,
if not, fix that first.
one test. and bam pump has elect. ...
...test light to the battery positive and the pointer to the wire and crank the engine if the light flashes the circuit is good and if the power is good this circuit is'nt the cause of your problem. On ...
462 questions posted
Usually answered in minutes!
480 Questions
463 Questions
423 Questions
317 Questions
281 Questions