1996 Isuzu Rodeo "torque specifications metric bolts" Questions

...or nut. Partially remove the bolts so that you can measure the shaft and obtain the correct torque from the chart. See ...

...2.8td just need to know head bolt torque setting Cylinder Head- 1st Head-- 40-42 ft.lbs 54-57Nm(metric) 2nd Head-- tighten each bolt to specifications as above plus tighten and additional 90

...METRIC 13M TORQUE IS - 39 - 41 FT LBS IF BOLT SIZE IS 15M METRIC TORQUE IS 51 - 55 FT LBS 17M METRIC BOLT TORQUE IS 83 - 95 FT LBS 19 METRIC BOLT TORQUE IS 105 - 115 FT LBS. CHECK THESE BOLTS SIZES I ...

...newton meters or ft/lbs. One is imperial and the other is metric Place a rock on a scale and weigh it in lbs of kg it is the same weight Torque specifications for cylinder head Suzuki 2006 XL7 ...

...torque specifications on 2006 Silverado 4x4 Fastener Tightening Specifications 140 foot pounds for the wheels all the way around. Application Specification Metric English Spare Tire Hoist Retaining ...

...torque specifications caliper to knuckle 85' pounds----guide bolt for caliper slide 26' pounds English not metric pounds go to torquespecs.tripod.com and they will list all specs for american cars. ...

...torque specs 2004 ENGINE Engine Mechanical - 1.6L (L91) - Aveo SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications Application Specification Metric English A/C ...

torque
Tension pulley bolts
25 N·m (2.5 kg-m, 18.5 lb-ft)
here is my doing this belt using my tools
see here, H27, 2004 GV

that is a large metric Allen(tm) wrench
I Also , have a

...and you need to borrow or buy a rack 3/8",1/2" metric sockets, I think a set of E-torks, a good size hammer, a repair manual (for directions and torque specifications), and a good jack and

...Metric Hub Remover Adapter 204-085 (T83P-1104-BH) is Fully Threaded onto 1107 and is Positioned Opposite the Two Stud Adapter 205-237 (T86P-1104-A1) Remove and discard three hub and bearing retainer ...