Question about Chrysler Town & Country
the rotor and the pads make all sort of rattling or squeaking noise. A worn wheel bearing allows the pads to be pushed away from the rotor: a mushy brake pedal or grinding noises are the common result
...wheel noise rattle in wheels on bumps, goes away when brakes applied. Brakes inspected in good condition , nothing loose. Could this be suspension parts? Its possible something in the suspension is ...
...noise from the driver side front wheel when I turn right.when I turn left all fine just right When I touch the brakes the noise goes away or even when I turn slightly to the right and touch brake the ...
Question about Cars & Trucks
...rattling noise but not from bearing - wheel spins up as expected. When doing the same with the offside, wheel spins quietly and freely by hand, whilst in neutral but when engine running and in gear, ...
Rattling noise I have a 1995 Chevy blazer with around 157,000 miles on it, and have some sort of rattling noise going on, seeming like its coming from the engine. It happens usually when I'm going ...
...noise when i excelerate from a dead stop. Feels like its coming from the rear. Also feel a bad rattle in the front every time hit a bump. Can feel the rattle in the gas and brake pedals. The clunk ...
...noise when going over rough roads but goes away if I apply the brakes. look over brakes for a loose or bent backing plate or any other damage , loose or missing parts ,brake pads ,if you have to jack ...
...noise I have a rattle in the left front wheel when I go over light bumps. The service tire pressure monitor indicator is on. When I apply the brakes while going over bumps the rattle goes away. Any ...
noise goes away during shifting of transmission btu comes right back after shift is complete,all bolts are tight and flywheel is good your torque converter is rattling that is the clutch on the stator
Question about Chrysler Town & Country
...Rattling_anti-rattle_clips_on_car_188747.htm Please let me know if this helps anyone else. I thought it was control arms, etc... and it was not!!!! Thanks [email protected] I replaced all of the ...
2,046 questions posted
Usually answered in minutes!
1,229 Questions
1,079 Questions
746 Questions
666 Questions
565 Questions