2005 Chrysler 300 "wiring back shifter" Questions

...back to the plastic piece. I checked and the shifter on moparpartsamerica.com has the parts for either $65 for the four speed shifterr or $119 for the 5 speed. The next time I will fix it

...back there looking while you depress the switch by hand. When you figure out which one it is, take it off and try it without being hooked up to the wires, then try it with the wires touching each ...

...shifter mech back together and test the spring tension. Cost is .78 cents and about an hour of work, mostly being careful not to break any think else, oh you have to remove the entire center console ...

...back to my shifter and my key switch so i can unhook that wire from my lighter so my battery can stay charge . Hire a professional, there's a great chance you fried a section of you PCM or ecm the ...

...back n forth when the shifter is pulled. The dust boot at the base of the shifter holds the wire to the steering column.Check this wire. I agree the fuses are good.But still remove all the ...

shifter stuck in park canot get it to budge butcar rolls back and forth I wanted to tell you of a similar problem that I had and to fix it here is what I did: If it is a console Shifter, take the body

...shifter back and forth. Severe rust, you might have to hit the linkage at the T case. Really severe, use a torch(last option) heat it up. But doing this you will have to replace the sleeve inside the ...

...the wires at the shifter broke under the boot so i put them back together and electric taped them no i didnt solder them cause i wanted it flexable so it wouldnt short cause of them being too ...

...BACK of the shifter lever. I attached the black wire from the front screw going around the shifter to the back screw. I also wrapped the wire around the shifter a couple of times before making the ...

...shifter will function properly thru all positions but if put back into park will lock there. What do I do to fix this? There is a switch mounted on the arm of the brake pedal (under a plastic cover ...