scan or code reader for your vehicle, make sure it supports the Controller Area Network (CAN) protocol. CALL THE DEALER OR AUTO-ZONE MAY BE ABLE TO TELL YOU THE PROPER NAMED SCANNER TO USE. GOOD-DAY !
...Auto Zone scan free of charge and most larger parts store too, just call first but i do know Auto Zone does. Most garage now will scan for around $10.00 to $15.00 since they know about parts ...
...auto parts stores will let you use their code readers/scan tools. When your SES is flashing, your engine is running in a state which could cause damage. Your problem could be as simple as a failed ...
...Auto zone or Napa and they will hook a scan tool/code reader up and retrieve the code/s that triggered the check engine light. Post any and all the codes retrieved and we will have a better ...
...scan tool) to get the code from the computer. Do not remove the cables from the battery until you check the codes because on many vehicles (and almost all vehicles before 2008) this will reset the ...
...Auto Zone will do it for you for FREE. A scan tool is needed to get the codes ...
...Auto Zone or Parts Source will scan free of charge and will give you the recommended instructions to address the issues your car's ECM has detected. Good luck and hope this was good news for you and ...
...auto shop will scan it for free, many do. what's the big deal, in remote Alaska village? what? if not in the USA, then why not say so, at that is different. each country has its own laws. on
...by the way a good scan tool cost around 3500.00 and a simple code reader around 300.00 or you could take it to an auto technician and have them reset it for 50.00 or less probably. happy
...again if it still tells u cant communicate take truck to an auto store for a scan some such as auto zone/ advanced auto do it for free and also have ur scanner checked could have a bad wire ...
726 questions posted
Usually answered in minutes!
1,015 Questions
517 Questions
487 Questions
187 Questions
66 Questions