2001 Acura MDX "plenum gasket 3" Questions

plenum,cleaned all passages,replaced all gaskets,adjusted valves,all injectors resistance readings are the same (.013/.014). removed injectors & flow tested,all o/k.no vacuum leaks, compression tested

are vacuum leaks around the plenum gasket. You can spray throttle body cleaner around the plenum gasket and listen for rpm changes.If the rpms change while doing this the plenum gasket may have a leak

...gasket the seals the injector assembly to the plenum. Carefully push down on the electrical assmbly while prying up the plenum. You also may have to remove the thermostat and hose. I've done this 3 ...

...plenum gasket which is between the throttle body and intake box that houses the injectors. This is a VERY common problem with Northstar engines of this generation. After tearing it apart, I found a ...

...plenum. But, if you do that, you will need to replace the plenum gasket, as it is not reusable. My flat rate guys pull the plenum every time they replace the plugs, all 6 takes them about 20

plenum-gasket-replacement.html https://www.tacomaworld.com/threads/valve-cover-gasket-replacement-3-4-v6-tips.301900 https://www.yotashop.com/toyota-5vz-fe-3-4l-engine-intake-manifold-gasket-set-ig965

...plenum gasket remove and replace Well basically, you remove the intake plenum and replace the gasket and reinstall the plenum. Here are the steps:1. Disconnect the negative battery cable from the ...

...gasket at the plenum so don't destroy it. All the other bolts are 10mm and use a screwdriver to loosen the clamps on the hose. The sensors have clips that you need to remove with a small screwdriver, ...

...plenum gasket. Start by pulling the positive cable from your battery. Next pull the intake cover off the top of the motor. On the drivers side you will see 3 coil packs or "cops" ( coil on plugs) ...

...to pull hills Has the OBD2 diagnostics been employed?Some of these type of machines will need the intake plenum removed to access the coil safely(expect to buy a intake plenum gasket and