2006 Nissan Altima "change intake manifold sensor" Questions

...intake manifold Vacuum Leaks -EVAP System Ignition Problems Air Idle Solenoid Problems --effecting idle Exhaust Leaks-effecting the O2 Sensor Readings Dirty MAF Sensor & lots more things to check ...

...change the sensor. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question. NISSAN OBDII DTC P1105 Manifold Absolute Pressure/Barometric Pressure Switch Solenoid ...

...change the fuel filter, and make sure the lines are good. Check the intake manifold bolts for tighness, check all vacuum lines. Best to have it running, wiggle them around and listen for a hiss. ...

...change it. Ebay got a good deal for like 45 dollers for one but I ain't buying it till I know I can do it myself Check the intake Manifold Gasket. I have an 2001 at idle the car almost cuts out & ...

manifold; can't idle car very well when the valve is open, but should not cause backfire. U is generally an ignition timing issue: the ECM (electronic control module) is responsible for that. Check it

...intake manifold, plugs/wires, dist/cap over two years of time but none helped. It's particularly severe in cold weather, more so this winter than the previous years. Now when I start cold the whole ...

manifold and/or the intake in any way shape or form. Check the pcv hose and valve. Some of those hoses get so soft that they almost turn to gum. If you pulled the injectors, make sure that you had put

change in the manifold pressure. The intake manifold pressure created due to engine load (intake manifold vacuum) and the rpm changes is measured by the MAP sensor and transformed into voltage outputs

change the map sensor on a 2006 Cadillac northstar dts 4.6L & 6.0L Engines The Manifold Absolute Pressure (MAP) Sensor is mounted in the front of the intake manifold behind the throttle body. 5.7L

...intake manifold gasket changed especially if this is or has been an intermittent problem. i had this problem and changed the sensor which was bad. then a month later i had the same problem. i added ...