2004 Nissan Maxima "code p0340" Questions

...code p0340 for slip n tcs is telling me is a sensor but it show2 code p0340 wicht sensor is it I am not sure what "slip n tcs" means but on the 2005 nissan maxima the code P0340 is for ...

...code P0340 could mean one or more of the following has happened: a wire or connector in the circuit could be grounded/shorted/broken the camshaft position sensor may have failed the PCM may have ...

i have nissan maxima 2005 with a code p0340 slip n tcs trouble code p0340 Cam Sensor circuuit. Could be anything within that circuit but it probably is the sensor itself.

98 Maxima will not start, code from reader is P0340 Camshaft Position Sensor. Will not fire at all even with starting fluid. P0340 is the camshaft position sensor A circuit {bank 1 or single sensor}

...me the p0340 & im still having the same issue. I use a after market part not the dealer OBD Codes have nothing to do with changing parts Codes are to be used to diagnose that

code P0340 I have a 1995 nissan maxima, it's got over 210,000 miles, and I just started hearing this weird rattling noise and the check engine light came on, so I did diagnostic and code p0340 came up

...code P0340 could mean one or more of the following has happened:a wire or connector in the circuit could be grounded/shorted/brokenthe camshaft position sensor may have failedthe PCM may have ...

camshaft sensor bank 2 code p0340 should i replace both sensors 2004 nissian maxima I had the same problem Nissan just replaced one.

...P0340 will come again. the code is reset when the car is restarted,second fuel quantity is dispersed due to fuel requirements from the rpm registered by the ecm,you have a ground in the tachometer ...

...p0340 Trouble Code: P0340Camshaft Position Sensor Circuit Malfunction Possible Causes: CMP sensor signal circuit is open or shorted to ground.CMP sensor signal is shorted to VREF or system power.CMP ...