2000 GMC Jimmy "throttle remove" Questions

Ad

Question about GMC Jimmy

1 Answer

...located on the drivers side of the throttle body opposite of where u will find the throttle cables connected to the metal pulley that opens the valve. may have to remove the air filter on year n ...

Ad

Question about GMC Jimmy

1 Answer

wont crank unless you prime throttle body Try removing the Idle Air Control Valve from the throttle body and clean it out with brake parts cleaner or carb cleaner. Spray a little wd40 in the area that

Ad

...throttle position sensor Removal & Installation Remove the idle air control (IAC) electrical connector (1) from the IAC sensor (4). Remove the manifold absolute pressure (MAP) sensor electrical ...

throttle plate and bore,pull your IAC motor and clean the pintle and seat,second thing these are known for is carbon chunks getting stuck in your EGR valve and it holds the pintle open,Remove your EGR

Question about GMC Jimmy

1 Answer

...throttle is). You would have to remove the intake hoses attached to it then work that throttle manually as you spray cleaner to it. This should get rid of the gas pedal getting stucked and maybe the ...

...remove the throttle body, clean it thoroughly and replace the gasket. If you would like to really check, you can get a scan tool and monitor IAC counts. If the engine is still idling high and the ...

Question about GMC Jimmy

1 Answer

...vehicle does not always start and stalls out at traffic lights. check your idle position sensor/throttle position sensor. can be removed and cleaned, may need new gasket when removed. use carb ...

...Remove the EGR valve and inspect the pintle for debris ( chunks of carbon) hanging it open , this will create a vacuum leak and cause a higher than normal idle. hard to exsplain on a little box like ...

...throttle plate, if it does clean it with a tooth brush and carb cleaner. Next check to see if your cat is plugged just unbolt it and let it drop down and start it up, since it got black smoke it's ...

remove the vacume line allowing the intake to **** in air, it runs better and does not cut off after a period of time. I have checked the timming again, fuel pressure, tried several things and can not

Not finding what you are looking for?
2000 GMC Jimmy Logo

1,950 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...