2000 GMC Jimmy "replacing oxygen sensors" Questions

Ad

Question about GMC Jimmy

1 Answer

...oxygen sensors There are four sensors. You will also need to get a specific tool that will help you remove the sensors. It looks like a socket for a ratchet tool, but has a slot on the side so the ...

Ad

my cylinder is misfiring on my 2000 gmc jimmy the cylinder is misfiring and check engine light is on. i just changed the oil filter. replace fuel filter, air filter, spark plugs, wires, distributor ...

Ad

Question about GMC Jimmy

1 Answer

...module, map sensor and exhaust O2 sensor. after replacing those reset trouble codes. only showing now code 44 oxygen sensor lean exhaust. any ideas. thanks chek filters for fuel on frame and in ...

Question about GMC Jimmy

1 Answer

92 gmc s-15 jimmy 4.3 z vin. dies when in drive at idle. It acts like it is running rich. Injectors and oxygen sensor are new. Check the IAC valve ( idle air control ) maybe dirty and sticking. Clean ...

Question about GMC Jimmy

5 Answers

...oxygen sensors last week because I was kind of having the same problem with my 99 GMC Jimmy. My Jimmy is running just fine now after I replaced all of my oxygen sensors. I bought them from O'Reilly ...

...p0174 code, it almost instantly pops back up. Is the MAF shot? What should its lb/min be? Could my O2 sensors be the issue? Oxygen sensors shoult be replaced about 65 thousand to 85 thousand

oxygen sensor is failing. That's the one between the cat and the muffler. Its only purpose is to serve as a comparator against the readings from the primary (pre-cat) sensors, to determine whether the

...sensors, we replaced the fuel filter when we replaced the motor in it.Since the new motor we have put a new cateletic converter on it, changed the oxygen sensor,rear wiper motor,signal cluster,new ...

I have a 1999 gmc jimmy that will start and run fine for a few days then will turn over but not start for days have replaced plugs,wires,cap and rotor,battery,emission module,fuel pump,all filters, ...

Question about GMC Jimmy

2 Answers

service engine light on Remove the battery connectors for 5 minutes and reconnect. Also you can run a scan. That fixes the bug. This is most likely the Oxygen Sensor which is easily replaced. Take the

Not finding what you are looking for?
2000 GMC Jimmy Logo

1,950 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...