2000 GMC Jimmy "idle learn procedure" Questions

Ad

...idle air control (IAC) electrical connector (1) from the IAC sensor (4). Remove the manifold absolute pressure (MAP) sensor electrical connector from the MAP sensor. Remove the water pump belt cover. ...

Ad

...idle, idle learn procedure Hi, I had my battery drain as the lights were left on, I now have a new battery but the car revs while idle, I need to reset the idle learn procedure but the one off the ...

Ad

...Idle Learn Procedure--Refer to the appropriate procedure: • Idle Learn for the 1.4L DOHC engine • Idle Learn for the 1.4L SOHC engine • Idle Learn for the 1.6L engine The crankshaft position (CKP) ...

Question about GMC Jimmy

1 Answer

...learn the new idle cells and Desired RPM should start to decrease. 4. Ignition OFF for 60 seconds. 5. Start and idle the engine in PARK for 3 minutes. 6. After the 3 minute run time the engine should ...

learn the new idle cells and Desired RPM should start to decrease. Ignition OFF for 60 seconds. Start and idle the engine in PARK for 3 minutes. After the 3 minute run time the engine should be idling

Question about GMC Jimmy

1 Answer

...IDLE LEARN PROCEDURE Whenever the battery cables, the electronic control module (ECM), or the ECM fuse is disconnected or replaced, the following idle learn procedure must be performed: 1. Turn the ...

Question about GMC Jimmy

1 Answer

...learn the idle air volume that keeps each engine within the specific range. It must be performed under any of the following conditions:  Each time electric throttle control actuator or ECM is ...

...idle air volume learning procedure. The first 2 must be done even if the ECM was just disconnected. The last one must be done if the ECM was replaced and if you do the last one the first 2 must be ...

...learn the new idle cells and Desired RPM should start to decrease.Ignition OFF for 60 seconds.Start and idle the engine in PARK for 3 minutes.After the 3 minute run time the engine should be idling ...

...initialized and symptoms like loud rattle from the hybrid trans axle assembly could be heard. Always perform the idle speed learning procedure if the auxiliary battery is disconnected for any

Not finding what you are looking for?
2000 GMC Jimmy Logo

1,950 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...