2005 Dodge Neon "pulled fuses draining" Questions

...draining my new battery during the night when everything is turned off. The cables were replaced with the new battery 2 months ago. I have checked all fuses with a tester that lights up on all the ...

...fuses & underhood fuese for blowen or inproper rating they was fine. also my int light went out. i still have power win,mirr,radio, and rearview mirror lights what could this be dome light fuse. ...

my 2005 dodge neon's battery won't hold a charge, lights flicker and dim and on the dashboard the word fuse flashes, what is going on? Could be a bad battery but I suspect your battery cable is either

over night the battery is dead Dodge neon 2004 I have put an amp meter between the battery and cable and have zero draw. I open the door and dome light comes--close door and dome light times out and ...

battery is dead everyday You either have a bad battery or a bad alternator. Most alternator shops and Advance auto parts store will check both for free. It is possible for an alternator to charge the ...

...pulled over and tried turning on the lights again but they did not so I drove home with out lights or radio, about a block away from the my house the car started making a noise like it was strugling ...

What is wrong when I pull JB Power #15 50 amp fuse the drain g what causes power drain. I can pull JB Power #15 - 50 amp fuse and the drain goes away. When fuse is pull there is no radio or heat. Has ...

pulled AM1 fuse with ECU-B fuse in place still 84ma draw. Would like list of fuses to start pulling to locate problem https://fuse-box.info/toyota/toyota-sienna-xl30-2011-2018-fuses https://imgvehicle

small drain on battery when off, enough to drain 2003 buick park ave. small drain on battery when off, enough to drain battery most of todays cars have small draws to maintain computer memory for the ...

another 1.2A. I disconnect the radio, amp, CD player and rear entertainment system and it still draws 3A unless the fuses are pulled. Any ideas? pull fuses or relay until current drop to 50mA and less