1996 Pontiac Sunfire "bad crank shaft sensor" Questions

bad cranck shaft sensor. where is that located? would it also make the car not start? Yes it would and will make the car not start. Your crank sensor is located behind your harmonic balancer, which is

1996 sunfire 2'4 wont start the car wont start Battery could be dead. If not then the ground wire could be loose or corroded. Fly wheel could be worn. Crank shaft position sensor could be bad.

...crank shaft sensor good? Regards Dan You have feul at the injector and spark at the plugs the car should start, the next ting i would do is check for commpression, make sure theres enough compression ...

spark from a pulled plug - - If the crank sensor is bad you will not get any spark. The PCM does not know the engine is turning with no crank sensor signal so it it does nothing. What else is it doing

crank shaft sensor back in and see if it works if not i would suggest bring it back to the shop you got it and trying to have them replace it because more then likely if it still dose not work you may

...Crank shaft sensor,cam sensor,bad battery and bad connection. There are hundreds of possible causes. Without knowing the fault codes if any, and/or conditions and details pertaining to when it died ...

...bad crank shaft sensor that was bad. I replace the sensor. The truck still won't start Check all the fuses all ok .Checked all relays all ok. Truck won't start. t start. I found a bad crank ...

...bad? Jun 18, 2009 More results from www.clublexus.com Lexus Crank Position Sensor ' LS400 SC300 ES300 GS300 ... www.partsgeek.com > Crank Position Sensor > Lexus Parts & Accessories Products 1 - ...

...put a new one on it and still wont crank. got new plugs and wires new fuel filter too. Could be a bad crank shaft, thats what the sensor is for to tell you there is some thing wrong with the ...

...The computer needs the crank senor to know the position of the crank shaft. If the sensor is bad the car will not start. check all the pulleys and make sure you dont have one with a bearing going ...