1996 Nissan Maxima "timing chain tensioner" Questions

...Timing Chain still rattling Hi, I rebuilt the engine in my 94 Nissan Altima. It has a brand new cylinder head and timing chain kit installed, including a new tensioner. At normal idle the chain ...

timing chain or get it out of time. The pump is driven by the timing chain, but is not "in time". The pump is under its own cover. The chain tensioner is under its own cover. The pump is removed after

...timing chain did they have to take the timing chain off to replace the water pump??? No. Only cars with timing BELTS you do that. no, but they have to push in the timing chain tensioner in order to ...

timing chain area, being driven by the timing chain. You need to remove drive belts, the small black side covers, that are screwed into the front engine cover. The left on has the chain tensioner, the

timing chain that needs to be changed. I also however noticed that when I accelerate there is an accelaration noise louder than I believe to be normal almost as if there is a hole in the exhaust pipe.

...timing chain cover. There are two black plates on the front cover. The one near the front of the car has the water pump behind it. The other one has the timing chain tensioner behind it. First you ...

Timing Chain I have 160,000 miles on my max and have never replaced or had problems with my timing chain. Wondering if I should go change it now with so many miles on my car or just wait? You can wait

...timing cover. One cover is for the chain tensioner, the other is for access to the water pump. I would recommend you replace the tensioner the same time you do the water pump. The reason is, you need ...

timing chain replacement on 96 niss maxima hi, everyone. i have nissan maxima 1996 with 150,000 miles on it. does anybody know when i should replace the timing chain? i thank you, guys, in advance. ...

...timing chain tensioner sleeve up and put a stopper pin in it to keep it from slipping. Take out the chain tensioner assembly.6Turn the crankshaft pulley in a backward motion until it rotates 20 ...