2001 Ford Taurus "intake manifold leaks oil" Questions

intake manifold sealant repair now leaking maybe oil? coolant b4 I had intake manifold removed so thermostat replaced, bolts broke as housing reattached. Sealant used on top of housing (manifold) to ...

...it is a very slow leak, about 3 qts every 3000 miles. any ideas? valve cover, intake manifold, front crank seal,timing cover, a quart per 1000 miles isnt a small leak. it probably the crankshaft ...

...intake manifold to replace the rear valve cover gasket. If that's the case the intake manifold also has two hidden screws in the rear against the firewall as well as an EGR exhaust line that must be ...

...intake manifold runner control to the manifold. Google; Intake Manifold Runner Control O-Ring 2001 Ford Taurus. Those O-Rings are available at Ford ($11) or a Harbor Freight Tools for around $1. If ...

...intake manifold which is on the back of the engine. Generally runs down on the backside of engine on the ground. Check to see if you are low on anti freeze. If the car ever got hot there is a chance ...

...intake manifold) or an exhaust manifold gasket leak. Could also mean there is a fuel injector on that bank of cylinders that is clogged or not operating. P1151 - Lack of HO2S21 Switches - Sensor ...

...intake manifold is the problem with my 2001 taurus Have you noticed any antifreeze in the oil..Its got to be going somewhere..If its going through the intake,,then the antifreeze will be steaming out ...

intake manifold by taking it off and comparing the ports going into the head. If the intake port on #4 cylinder is wet there may be a problem in the Intake. You will also be able to look at the intake

...intake manifold. Go to a reputable repair shop and have them check the manifold for leaks. You can also check yourself by buying an automotive stethoscope, and moving it around the perimeter of the ...

...these things related, is it the TPS, or what? You have a massive vacuum leak somewhere. I would check the intake manifold gaskets for leaks and to see if the Idle Air Control valve is stuck