...cylinder has been checked and the slave cylinder has been changed and bled. Any suggestions? Could be a worn out piolet bearing located in the back of the crankshaft in front of the clutch
...clutch to release while you have your foot down and haven't done that yet. Change the master and bleed the system and you should be fine, Sounds like the clutch is on its way out or needs adjustment. ...
Question about Ford Escort
...is on the end of the lever that goes into the clutch housing Before you change the clutch make sure that the problem is not in the slave cylinder or clutch master cylinder or cable as the case may
Question about Ford Escort
...change the clutch kit but the gear is still hard to shift i thought the clutch pressure plate was faulty but even when i change it remain the same Check the hydraulic clutch operation. This is a ...
...Clutch by Blocking the Slave Cylinder If your car is like mine check brake fluid. If your brake fluid got low you may have gotten air in the line. My brake fluid reservoir provides the fluid to my ...
Question about Ford Escort
...change it. https://www.mycarspecs.com/cost/geo/storm/1992/3-dr/clutch-slave-cylinder-replacement-cost https://www.google.com/search?q=92+geo+storm+replace+clutch+slave+cylinder .. No! The slave ...
clutch safty switch off to change it. Any ideas? Probably not. Bleeding clutch slave cylinders is tricky because you cant "pump it up". The master cylinder has no static valve so the best way to bleed
...CHANGE RELEASE BEARING WITH FORK WHEN DOING A CLUTCH SERVICE..)...I assume you did...I would inspect for leaks..,Bleed it again if no leaks...If that don't help and no leaks are found change slave ...
Question about Audi Cars & Trucks
...slave master cylinder and i tried to bleed my clutch but it doesn't get up. what could be a problem? the master cylinder slave or cylinder or both slave cylinder failure slave cylinder in inside ...
Question about Cars & Trucks
...clutch, master cylinder, slave cylinde, folk but still cannot get any clutch You may still have air in the system Try filling the reservoir again and bleed out the air at the slave cylinder Use a ...
753 questions posted
Usually answered in minutes!
2,142 Questions
1,335 Questions
1,118 Questions
957 Questions
841 Questions