...top of the engine compartment, but to take it out you have to remove the coolant reservoir, and the wiper fluid container to have socket access to the three bolts that mount the alternator. One bolt ...
...Remove the two molex plugs, use a flat head screwdrive to lift the catches on these plugs. Just below these two, locate the positive lead from the alt. it has a soft red cap. Use the 10mm socket to ...
...top of what looks like a pully directly above/behind the alternator. Fit the wrench in snugly, and pull forward until the belt is loose. Remove the belt from the alternator and release the tension ...
remove the engine mount from the top of the fender well, (17mm deep well socket and 17mm wrench required) it is not necessary to remove the mount from the side of the engine. Remove the timing cover,
remove. Once you get all of this out of the way, it will make your job 100% easier. The hoses should be slacked enough so that you can detension the belt properly. NOW, what you actually set out to do
Question about Ford Escort
...top center pulley damage 1991 ford escort gt 1.8L the pulley from the engine that turns the alternator/belt is damaged and came off. what is that one called, and after replacing that how difficult is ...
...Remove the bolt or screw, and scrape away any paint or grime. A star washer will help your ground wire maintain solid contact with the car body. Use a ring terminal on the end of the ground wire, to ...
...top dead center (see Resources below). Jack up the engine and remove the motor mount. Using the tensioner, loosen and remove the belt. Check whether the problem was in the tensioner. Replace the belt ...
...top dead center on the exhaust stroke and remove the harmonic balancer to get in to the pump then you will have the do believe eight bolts to remove the water pump install in reverse.....hope this ...
1,785 questions posted
Usually answered in minutes!
2,142 Questions
1,118 Questions
957 Questions
841 Questions
627 Questions