1998 Ford Crown Victoria "abs light" Questions

...abs light still on I put the scanner on it and reed that it dosn't have comuinication with the computer,I need to know what have to do now,thanks. Scanner not communicating with the computer is most ...

...ABS" light comes on but not as often. When it does come on it stays on for like 2 days and then it quits for a while. I asked a guy that worked at Auto Zone what the abs light meant, and he told me ...

abs and brake light on changed all 4 wheel sensors,cleaned all connections,took plug off abs module and cleaned. you need to have the code pulled to find out what the problem is.so far you have spent ...

1996 crown vic pi abs light on. can i pull codes 1996 crown vic pi abs light on. can i pull codes manually without scanner No you must have a scan tool

My abs light wont go off ? You have to diagnose the reason the ABS Light is on, and repair the problem. Why is that an issue!

...light, ABS light, brake light, and fire suppression system lights illuminated. My AutoEnginuty scanner shows a U1900 code and can not communicate with the ABS module or the fire suppression system ...

abs light will come on briefly during start up and then go out. if there is a problem detected in the system, the light will come on at start up and remain on until the problem is fixed. since this is

abs light was on i turned a corner and now car wont move in drive or reverse check For proper fluid level, If level is good Try changing the trans filter Check your sensor. My ABS light has been on ...

...ABS light on, no communication to module. Power and grounds good at module connector. unplugged all speed sensors no change in module. what else is there? Could be contaminated fluid, bad ...

abs light is also flickering on. and ive replaced both the battery and alternator, there is no corrosion on battery terminals. please help! No guessing here That wouldn't even be possible You need the