1997 Ford Expedition "replace door keypad" Questions

...but if not, it will have to be replaced. If your mechanically inclined I can tell you how to test it. it could be a bad door switch or a short in the keypad if you have keyless enter on the driver ...

...out good can you help!!!! replace the drive belt and if you have a keypad on the drivers door and it has been used alot they get shorts in them and will drain the battery so have that tested as ...

door with key in ignition does not sound. There are other things, but you get the idea. Everything works "manually" - headlights, autolocks, keypad, etc. Is this a fuse or some kind of relay

replace the door actuators. You could do one at a time but alll will most likely be affected. I know its hard to understand how all the doors could go out about the same time if thats the case but its

...door, all operations must start with the 5 digit code first then follow it with the other options. When pressing the controls on the keyless entry keypad, press the middle of the buttons to ensure a ...

door ajar light. I also replaced the headlight switch, and that help for a few weeks. I don't know what to do next, I love truck but this is driving me crazy!! Hello there. I had the same problem once

...door code on a ford expidition from the owners manual Programming your own personal entry code To program your own code: 1. Enter factory set code (keypad will illuminate when pressed). 2. Press 1/2 ...

...DOOR PAD this from the owners manual Programming your own personal entry code To program your own code: 1. Enter factory set code (keypad will illuminate when pressed). 2. Press 1/2 control within ...

...door with the key, i have to use the beeper but for some reason that is not connecting with the car (03 ford expidition). The car has two alarms, one i turned off with a key provided but the other ...

...keypad (again door locks cycle to indicate keypad trained) it didn't. i have tried this a number of times and it hasn't worked can anyone help me with programming a new keypad please Adding and ...