1996 Ford Explorer "remove fan" Questions

...remove the fan clutch To remove fan clutch, you need a special clutch fan tool. Sometimes i can remove it with a large adjustable wrench while locking the water pump pulley. Remember to turn ...

...remove fan Well, if it's a 5.0L engine, remove the 4 bolts holding the fan to the pulley. If it's a 4.0L engine, you need to hold the waterpump pulley still and break the nut loose holding the fan ...

...remove the clutch and fan? this is hard you need to remove the manual trans house first then the bolts well here it is with the kit for replacement clutch parts it will come with instructions its all ...

remove the fan blade from the water pump -= the seal is leaking and i am replacing the seal behind the water pump - but i cannot figure out how to remove the fan blade . If you go to Auto Zone or some

remove fan from water pump or remove water pump Which do you want to accomplish? To get the pump off you have to remove the fan first.

...Remove the fan bolts as well as the shroud, followed by the 4 radiator push pins. Also remove the A/C condenser brackets near the rear of the radiator, and wire the A/C condenser in place to keep it ...

...remove fan and fan shrout, disconnect both a/c line's going to a/c condensor, remove upper and lower coolant hoses, you'll well need a oil cooler line disconnect tool ( napa has it part # 775-9086 ) ...

fan? I can remove the fan from the arm its connected to but not completely free of the arm to replace. Usually its easiest to remove the fan and shroud together, shouldn't be much of a problem finding

...remove the fan the fan is betwen the water pump and the radiator what can of tools i nedeed it special tools for removing fan clutch ... availiable at almost any auto parts place ... becareful when ...

...should be stamped into the fan shroud plastic near the hood latch.You will most likely need to remove the air duct for clearance. You may need to loosen, or remove the the fan shroud for